DRIPPER TUBE DIAMETER 16-60 CM-400 METERS DOUBLE drip irrigation WATER GARDEN
DRIPPER TUBE DIAMETER 16-60 CM-400 METERS DOUBLE drip irrigation WATER GARDEN
Diameter 16 mm-60 cm step-400 metres
The DOUBLE type with six holes for water jets, is used on sandy soils to increase the irrigated area by reducing the percolation.
Is made out of high quality polyethylene cylindrical tube, with drippers at "eddy currents"
inside the tube itself at predetermined distances.
The tube is made with cavities in large section that exploits the turbulence of flows,
reduce the risk of blockages, obstructions and sedimentation resulting from the use of fertilizers.
The Dripper is a "symmetric" patented and designed to weld together inseparably
the inner wall of the tube so as to avoid any risk of detachment and breakage.
These special features make the Dripper hose very resistant to rubbing and squeezing on the ground,
mechanical stress during and after installation, and allow to rewind and
go down the tube several times with the use of manual and mechanical means.
The interior walls are smooth and uniform thickness of the pipe minimizes pressure losses,
allow the cleaning of the Dripper and allow more lengths in use.
Advantages:
-Increase in quality and quantity of production thanks to water delivery is calculated according to the needs of the plant.
-Savings in the use of fertilizers, whose percentage of employment can be calculated depending on the scope of the drippers and the length of the strokes.
-Save on labor, because the plants are easily achievable and, having fittings, are maintenance-free.
-The tube can be reused after use or finished the harvest.
Applications:
-Multiannual irrigation systems
-Plants in open fields or in greenhouses
-Cultivation of vegetables and fruit
-Horticulture and gardening
-Irrigation with gently sloping land
-Fertigation
-Concrete sub-irrigation
Made in Italy
Diameter | 16 mm |
Emitter flow rate | l/h 4 |
Working pressure | ATM 1.0-2.0 |
Recommended filtration | 130 mesh |
Recommended maximum length (in m), variable slope/pitch Dripper (in cm)
Incline in% | Step 20 cm | Step 30 cm | Step 40 cm | Step 50 cm | Step 60 cm | Pressure in bar |
-2% | 55 | 75 | 85 | 95 | 110 | 1.5 |
-1% | 50 | 66 | 77 | 88 | 100 | 1.5 |
0% | 45 | 60 | 70 | 80 | 90 | 1.5 |
1% | 40 | 55 | 65 | 70 | 80 | 1.5 |
2% | 35 | 50 | 60 | 65 | 70 | 1.5 |
You might also like