DRIP HOSE d. 16 X 30 CM STEP-1000 MT DRIP IRRIGATION PIPE View larger

DRIP HOSE d. 16 X 30 CM STEP-1000 MT DRIP IRRIGATION PIPE

1791630

New

DRIP HOSE d. 16 X 30 CM STEP-1000 MT DRIP IRRIGATION PIPE

More details

Available

99,70 €

QUICK SHIPMENTS

Paga con Carta di credito, Paypal, Bonifico oppure alla Consegna
Paga con Carta di credito, Paypal, Bonifico oppure alla Consegna

More info

Diameter 16 mm-1000 -18 mil 30 cm distance holes

A dripline made out of thin, flexible pipe with Dripper in turbulent flows into predetermined distances.
Made of polyethylene of first quality which guarantees maximum reliability over time
and the best performance in terms of mechanical resistance and elongation.
The Dripper is placed during extrusion, so inseparably tied to the inner wall of the tube.
It creates an obstacle to water pressure through internal cavities, specially designed, and made large steps,
preventing blockages and fouling. This structure also allows to minimize pressure losses
and the construction of installations of considerable length with uniformity.
The dripline is the safe and convenient solution for drip irrigation systems on each type of crop,
field, which is intensive irrigation for crops, trees, floriculture and gardening.
Due to the stability of the flow, than normal drip hoses without Dripper
button to set the amount of water for each drop point and allows significant savings in labor with substantial increases in the quality and quantity of crops.
A water filter system is essential for the proper functioning of a drip irrigation system.
The type of filter system depends on irrigation water use and can be composed of Cyclone filters,
sand with fine grain size, disk filters, network, etc. Filtration is recommended in any case not less than 130 mesh.

Advantages
-Increase in quality and quantity of production thanks to water delivery is calculated according to the needs of the plant.
-Savings in the use of fertilizers, whose percentage of employment can be calculated depending on the scope of the drippers and the length of the strokes.
-Save on labor, because the plants are easily achievable and, having fittings, are maintenance-free.

Before installing the hose you should have defined the correct path for development
of the irrigation system
. Place the hose with the double green line riot
upwards in order to avoid clogging of Dripper for depositing sedimentation.
During installation avoid all the shock that may cause
damage to the product due to cuts, holes, abrasions, pull-ups, etc.

Use shims plus the crop cuff with bugs with chewing mouthparts or stinging.
Cover the dripline with Earth to prevent the displacement caused by the wind,
damage caused by any rodents and to reduce exposure to UV radiation to determine durability.

Do not install or provide adequate protection, if installation is performed under transparent plastic film, to avoid burns caused by lens effect.

Made in Italy

Nominal diameter 16 mm
Inner diameter 16.1 mm
Outer diameter 17 mm
Thickness 18 mil/0.45 mm
Max operating pressure 1.7 bar
Scope 4.0 l/h

Recommended maximum length (in m), variable slope/pitch Dripper (in cm)

Incline in% Step 30 cm Step 40 cm Step 60 cm
-1% 91 110 144
0% 85 102 131
1% 78 92 115
  • Reviews
  • Ottimo tubo, sia per la sua lunghezza che per il prezzo! Costruito con un ottimo materiale e consegnato in anticipo rispetto ai tempi previsti

    Read all reviews

    Accessories

    28 other products in the same category:

    Feedaty Reviews (1)

    Ottimo tubo, sia per la sua lunghezza che per il prezzo! Costruito con un ottimo materiale e consegnato in anticipo rispetto ai tempi previsti