100 MT TUBE Ø 16/33 CM DISTANCE DOUBLE HOLE DRIP IRRIGATION

Tube Ø 16 mm 100 metres length drip hole spacing 33 cm. Double hole.

Is made out of high quality polyethylene cylindrical tube, with drippers at "eddy currents"
inside the tube itself at predetermined distances.
The tube is made with cavities in large section that exploits the turbulence of flows,
reduce the risk of blockages, obstructions and sedimentation resulting from the use of fertilizers.
The Dripper is a "symmetric" patented and designed to weld together inseparably
the inner wall of the tube so as to avoid any risk of detachment and breakage.
These special features make the Dripper hose very resistant to rubbing and squeezing on the ground,
mechanical stress during and after installation, and allow to rewind and
go down the tube several times with the use of manual and mechanical means.
The interior walls are smooth and uniform thickness of the pipe minimizes pressure losses,
allow the cleaning of the Dripper and allow more lengths in use.

Advantages:
-Increase in quality and quantity of production thanks to water delivery is calculated according to the needs of the plant.
-Savings in the use of fertilizers, whose percentage of employment can be calculated depending on the scope of the drippers and the length of the strokes.
-Save on labor, because the plants are easily achievable and, having fittings, are maintenance-free.
-The tube can be reused after use or finished the harvest.

Applications:
-Multiannual irrigation systems
-Plants in open fields or in greenhouses
-Cultivation of vegetables and fruit
-Horticulture and gardening
-Irrigation with gently sloping land
-Fertigation
-Concrete sub-irrigation

Made in Italy

Recommended maximum length (in m), variable slope/pitch Dripper (in cm)